Product images and mechanical references for this assembly. Confirm the selected model and drawing revision before design-in.
Model no.Z043WQ35
Z043WQ35 TFT-LCD Display Module
Z043WQ35 is a tft-lcd display module. Review the module specifications, product images and integration requirements before requesting a sample.
- Module Dimensions: 105.4 × 67.15 × 2.9 mm
- Operating Temperature: -20 to 70 °C
- Display Mode
- TFT,Normally black
- Viewing Angle
- IPS
Specification confirmation. Confirm interface against the latest approved specification before design-in.
Z043WQ35 product introduction
Z043WQ35 is a tft-lcd display module. Review the module specifications, product images and integration requirements before requesting a sample. The standard tft lcd displays format helps define the display area and user-interface layout while the exact model reference keeps the optical, electrical and mechanical requirements tied to one assembly.
Module Dimensions: 105.4 × 67.15 × 2.9 mm. Operating Temperature: -20 to 70 °C. Use these published characteristics to compare Z043WQ35 with the requirements of your equipment. Brightness, viewing direction and touch operation should be evaluated in the intended enclosure, lighting and user environment.
Confirm the host connection and controller requirements for Z043WQ35. Review supply levels, backlight drive, cable routing and the matching pin assignment before connecting a sample. A shared interface name alone does not establish compatibility between two modules.
Product features
The following Z043WQ35 attributes are listed for this assembly. Select the module by the requirements that affect your product, including the optical output, controller interface and mechanical envelope.
- Module Dimensions: 105.4 × 67.15 × 2.9 mm
- Operating Temperature: -20 to 70 °C
Technical specifications
| Parameter | Value |
|---|---|
| Module Dimensions | 105.4 × 67.15 × 2.9 mm |
| Active Area | 95.04 × 53.856 mm |
| Working Temperatures | -20 To 70 Degree |
| Display Mode | TFT,Normally Black |
| LCM (W x H x D) | 105.4*67.15*2.9 mm |
| Viewing Direction | IPS |
| Operating Temperature | -20 to 70 °C |
| Storage Temperature | -30 to 80 °C |
Confirm interface against the latest approved module specification before design-in.
Interface & pin definition
Use the Z043WQ35 electrical documentation to confirm pin numbering, signal direction, voltage limits, backlight connections and any touch-controller wiring. The connector and FPC arrangement must match the host electronics and the quoted assembly.
| Parameter | Value |
|---|
Product photographs
Mechanical drawings & documents
Check the dimensions, active area, connector position and cable clearance of Z043WQ35 against the enclosure. Confirm the drawing revision before tooling.
Application & selection guidance
Z043WQ35 can be evaluated for equipment user interfaces and embedded instruments and control panels. These are integration directions: suitability depends on the final optical, electrical, mechanical and environmental requirements.
Compare the display format with your available viewing area, then check touch operation and power requirements. Evaluate a sample in the real enclosure before approving production. Share the target conditions and quantity so Fuzheng can review the selected Z043WQ35 configuration.
Z043WQ35 frequently asked questions
What specifications are listed for Z043WQ35?
Module Dimensions: 105.4 × 67.15 × 2.9 mm; Operating Temperature: -20 to 70 °C. Confirm the selected assembly and latest drawing revision when requesting a quotation.
How should Z043WQ35 connect to a host system?
Request the exact interface documentation for this assembly. Check the pin assignment, connector, logic voltage, timing and initialization against your host controller. Do not apply power based only on a similar product photograph.
Is touch information available for Z043WQ35?
A fixed touch configuration is not specified in this record. Include your touch, cover-lens and controller requirements in the inquiry for Z043WQ35 so the exact assembly can be reviewed.
Where can I find the drawing for Z043WQ35?
The drawing section contains 1 model-associated mechanical reference image. Open it at full size and confirm the model suffix, tolerances and revision before enclosure design or tooling.
What should I send when requesting a Z043WQ35 sample?
Include the model Z043WQ35, target interface, touch and cover-lens requirements, operating environment, sample quantity and estimated production quantity. Share a host schematic or enclosure drawing when available so electrical and mechanical fit can be reviewed.
Request a quotation or sample
Send the Z043WQ35 reference together with the interface, touch, enclosure, sample quantity and production schedule. Fuzheng will review the matching module and document requirements with your inquiry.
Compare more in Standard TFT LCD Displays.
FZ177-128160 1.77-Inch 128×160 SPI TFT-LCD Display
FZ177-128160 1.77-inch 128×160 transmissive TFT-LCD with ST7735S controller, 4-wire SPI, 14-pin FPC and supplied 8-pin breakout reference.
10.1-Inch 1024x600 RGB Touch TFT-LCD
10.1-Inch 1024x600 RGB Touch TFT-LCD: review specifications, product photos and related modules, then request a sample or quote from Fuzheng.
10-Inch 1024x600 LVDS TFT-LCD Display
10-Inch 1024x600 LVDS TFT-LCD Display: review specifications, product photos and related modules, then request a sample or quote from Fuzheng.
Discuss this display with our team
Z043WQ35
Share the required interface, touch assembly, quantity and project timing. Pricing and availability are confirmed by inquiry.
