Product images and mechanical references for this assembly. Confirm the selected model and drawing revision before design-in.

Model no.MSP2807

MSP2807 2.8-Inch TFT-LCD Display Module

MSP2807 is a 2.8-inch tft-lcd display module and a SPI 4-LINE interface. Review the module specifications, product images and integration requirements before requesting a sample.

SPI 4-LINE
Without RTP
Interface: SPI 4-LINE
Driver IC: ILI9341
Touch: Without RTP
Operating Temperature: -20℃ to 60℃
Screen Size: 2.8 inch

Screen Size: 2.8 inch
Display Mode: TFT,Normally White
Interface: SPI 4-LINE
Touch: Resistive touch

Review the listed module configuration and confirm the matching specification and drawing revision with your inquiry.

Specification confirmation. Confirm resolution against the latest approved specification before design-in.

MSP2807 product introduction

MSP2807 is a 2.8-inch tft-lcd display module and a SPI 4-LINE interface. Review the module specifications, product images and integration requirements before requesting a sample. The standard tft lcd displays format helps define the display area and user-interface layout while the exact model reference keeps the optical, electrical and mechanical requirements tied to one assembly.

Driver IC: ILI9341. Touch: Without RTP. Operating Temperature: -20℃ to 60℃. Use these published characteristics to compare MSP2807 with the requirements of your equipment. Brightness, viewing direction and touch operation should be evaluated in the intended enclosure, lighting and user environment.

The SPI 4-LINE connection on MSP2807 should be checked against the host controller and connector arrangement. Review supply levels, backlight drive, cable routing and the matching pin assignment before connecting a sample. A shared interface name alone does not establish compatibility between two modules.

Product features

The following MSP2807 attributes are listed for this assembly. Select the module by the requirements that affect your product, including the optical output, controller interface and mechanical envelope.

Interface: SPI 4-LINE
Driver IC: ILI9341
Touch: Without RTP
Operating Temperature: -20℃ to 60℃
Screen Size: 2.8 inch

Technical specifications

MSP2807 technical parameters
Parameter	Value
Active Area	43.2 × 57.6() mm
Interface	SPI 4-LINE
Display Mode	TFT,Normally White
Driver IC	ILI9341
Touch	Without RTP
Module Interface	4-wire SPI interface
Operating Temperature	-20℃ to 60℃
Storage Temperature	-30℃ to 70℃
VCC power voltage	3.3V~5V
Logic IO port voltage	3.3V(TTL)
Screen Size	2.8 inch

Confirm resolution against the latest approved module specification before design-in.

Interface & pin definition

Use the MSP2807 electrical documentation to confirm pin numbering, signal direction, voltage limits, backlight connections and any touch-controller wiring. The connector and FPC arrangement must match the host electronics and the quoted assembly.

MSP2807 technical parameters
Parameter	Value
Interface	SPI 4-LINE
Driver IC	ILI9341
Touch	Without RTP

Product photographs

MSP2807 product view 1

MSP2807 product view 2

MSP2807 product view 3

MSP2807 product view 4

MSP2807 product view 5

MSP2807 product view 6

MSP2807 product view 7

MSP2807 product view 8

Mechanical drawings & documents

Request the MSP2807 mechanical drawing and datasheet with your project inquiry. Confirm the outline, active area, mounting features and FPC position before finalizing the enclosure.

Application & selection guidance

MSP2807 can be evaluated for equipment user interfaces and embedded instruments and control panels. These are integration directions: suitability depends on the final optical, electrical, mechanical and environmental requirements.

Compare the 2.8-inch display format with your available viewing area, then check SPI 4-LINE host connectivity, touch operation and power requirements. Evaluate a sample in the real enclosure before approving production. Share the target conditions and quantity so Fuzheng can review the selected MSP2807 configuration.

MSP2807 frequently asked questions

What specifications are listed for MSP2807?

Interface: SPI 4-LINE; Driver IC: ILI9341; Touch: Without RTP; Operating Temperature: -20℃ to 60℃; Screen Size: 2.8 inch. Confirm the selected assembly and latest drawing revision when requesting a quotation.

How should MSP2807 connect to a host system?

MSP2807 lists a SPI 4-LINE interface. Check the pin assignment, connector, logic voltage, timing and initialization against your host controller. Do not apply power based only on a similar product photograph.

Is touch information available for MSP2807?

The listed touch configuration is Without RTP. Confirm the touch controller, connector, cover lens, total thickness and application requirements with the sample request.

Where can I find the drawing for MSP2807?

Request the mechanical drawing and electrical datasheet for MSP2807. Include available enclosure space, mounting method and FPC routing constraints so the correct assembly documents can be supplied.

What should I send when requesting a MSP2807 sample?

Include the model MSP2807, target interface, touch and cover-lens requirements, operating environment, sample quantity and estimated production quantity. Share a host schematic or enclosure drawing when available so electrical and mechanical fit can be reviewed.

Request a quotation or sample

Send the MSP2807 reference together with the interface, touch, enclosure, sample quantity and production schedule. Fuzheng will review the matching module and document requirements with your inquiry.

Request a MSP2807 quote or evaluation sample →

Discuss this display with our team

MSP2807

Share the required interface, touch assembly, quantity and project timing. Pricing and availability are confirmed by inquiry.

Start a product inquiry →